The Stepper motor is a typical mechatronic component. Compared with an ordinary DC motor, its internal structure and control principle is more complex. It can be divided into a hybrid(HB type), permanent magnet(PM type), and reactive(VR type). the structure of the HB type has some characteristics

　　For the position closed-loop control, although it can improve the precision of position and output torque in the application, yet the specific performance is direct to the drive technology and its characteristic.　　In practice, the controller will send directions and pulse signals. After sending th

　　In Application, the stepper motor can’t directly connect AC power and DC power, it should be equipped with A driver. In an open-loop control system, it can realize the diagonal displacement after receiving the control pulse.　　At the same time, it can be used as the servo control system, if the obj

The Definition: The Reason why the stepper motor is suitable for the single-chip microcomputer control is that it use the digital control to control the operation of the motor. When the control unit sends a signal pulse, the stepper motor will rotate a corresponding step angle, so the realizing of m

　　The steppe motor driver can be used in the NMEA 23, 34 stepping motor. As a type of driver, what is the unique characteristic of the double voltage stepper driver?　　Picture 1 shows is the common used double voltage stepper motor diver. It’s the advantage is that:　　(1) Greatly improving the frequen

The integrated stepper motor coupling is mainly used to connect the shaft and the driven shaft to transmit torque and has relatively precise transmission performance.