NEMA 23 Stepper Servo Motor
Electrical Specification
Although the NEMA 23 stepper motor is an equipment that can be controlled accurately, it is an open-loop service, so an encoder should be installed to realize closed-loop feedback control. The NEMA 23 closed-loop stepper motor is an assembly of stepper motor with encoder.
Commonly, the encoder is installed on the double shaft motor back. In principle, it is possible to install a motor on one end of the lead screw and an encoder on the other. But it may be affected by the accuracy of the stepper motor. The misjudgment of the losing step occurs.
If you have any interest, please contact us.
| Electrical Specification | ||||||||
| Series Model | Rated Voltage(V) | L (mm) | Phase Current (A) | Phase Resistance (Omh) | Phase Inductance (mH) | Holding Torque (N.cm) | Moment of Inertia (g.cm2) | Motor Weight ( g) |
| HS561-11030A | 2.4 | 56 | 3.0 | 0.8 | 2.4 | 110 | 200 | 980 |
| HS561-11042A | 1.68 | 56 | 4.2 | 0.4 | 1.2 | 110 | 200 | 980 |
| HS561-22030A | 3.6 | 80 | 3.0 | 1.2 | 4.0 | 220 | 480 | 1400 |
| HS561-22042A | 2.94 | 80 | 4.2 | 0.7 | 2.0 | 220 | 480 | 1400 |
| HS561-25030A | 4.2 | 100 | 3.0 | 1.4 | 5.5 | 250 | 800 | 1550 |
| HS561-28042A | 2.94 | 100 | 4.2 | 0.7 | 2.5 | 280 | 800 | 1550 |
Mechanical Dimensions
| Mechanical Dimensions |
| Standard Leadwire Configuration |
| |
Custom Option
Custom Shaft
Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor
Planetary Gearbox Stepper Motor
Spur Gearbox Stepper Motor
Connector
Molex, Harwin, Tyco/AMP, JST e tc.
Special length, Protective hose
Download
Ability
Ability:
To reduce the vibration and fluctuation in NEMA 23 stepper motor, the solution that I.CH takes is to use closed-loop format. Probably the parameter that I.CH lists is not suitable to you, but as an experienced manufacturer, we can custom.
Advantage:
1, High efficiency
2, Low vibration
3, High response
Services:
1, One-year warranty.
2, Technological instruction.
FAQ:
1, what is the step angle of NEMA 23 stepper motor?
1.8 Degree.
2, what is the inertia ratio of closed-loop stepper motor?
You can find the corresponding parameter listed from PDF.