PRODUCTS
You are here: Home / Products / Driver and Accessory / Stepper Servo Motor Driver / Closed Loop Stepper Motor Driver
Share to:

Closed Loop Stepper Motor Driver

• Manufacturer Number: SS5/SS9
• Supply Voltage: 24-48VDC, 24-75VDC
• Peak Current: 5.5A/9A
• Dimensions: 118×76×34mm
• Suitable motor: NEMA 17-NEMA 34 Closed-Loop Stepper Motor
• Application: Motor Control

Quantity:

Description


The SS series product that I.CH develops and manufactures is a closed-loop stepper motor control system. By feedback signal of the encoder, the motion of the stepper motor can be controlled in full closed-loop, which can eliminate the disadvantage in the open-loop control scheme, such as vibration in low frequency, large heat, out of step. And it has a certain overload capacity, which improves the utilization rate of torque and response of the system.


Because of the difference in motor and requirements of the servo algorithm, only the driver and stepper motor are one-to-one, and the parameter must be adjusted according to the load condition, can the best effect of the product achieve. When leaving the factory, the motor and driver have been matched in a complete set, and the driver has stored the default motion parameter. The customer only needs adjusting the corresponding motion parameters.


For hardware connection and other electrical parameters of the driver, the customer can refer to the SS5/SS9 manual.


Model

Rated Voltage

Peak Current

Dimensions

Matched Motor

Manual

SS5

24-48VDC

5.5A

118×76×34mm

NEMA17-NEMA24 Stepper Servo Motor

SS5 Stepper Servo Motor.pdf

SS9

24-75VDC

9A

118×76×34mm

NEMA34 Stepper Servo Motor

SS9 Stepper Servo Motor.pdf


ABOUT US

PRODUCT LIST

LIST

CONTACT

Add:Duke-317,No.108 Mingchi Road, Qinghuai District,Nanjing 210022,P.R.China

Tel:+86 25 5118 0871
Fax:+86 25 5118 0872 
Emial:sales@ichmo.com

FOLLOW US

Copyright  2016 I.CH All rights reserved. Supproted by Leadong   Sitemap