Planetary gearbox D323PH
Specification
| Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | 主轴最Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
| Powder Metal | Sleeve bearings | ≤3Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
| Powder Metal | Ball bearings | ≤3.5Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Pinion Specifications
| Module | No. of teeth | Pressure angle | Helix angle | Hole diameter | Reduction ratio. |
| 0.5 | 11 | 20° | 18°(左,Left) | 3.16 | 1/18,1/25,1/94,1/132,1/250,1/349,1/683 |
| 0.5 | 17 | 20° | 18°(左,Left) | 3.16 | 1/13,1/48,1/68,1/180,1/491 |
| 0.5 | 8 | 20° | 18°(左,Left) | 2.28 | 1/33,1/887 |
Gearbox Description
| Reduction ratio | 1/13 | 1/18 | 1/25 | 1/33 | 1/48 | 1/68 | 1/94 | 1/132 | 1/180 | 1/250 | 1/349 | 1/491 | 1/683 | 1/887 |
| Rated tolerance torque (Kg.cm Max.) | 4.0 | 4.0 | 6.0 | 6.0 | 8.0 | 8.0 | 10.0 | 10.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 |
| Max momentary tolerance torque (Kg.cm ) | 12.0 | 12.0 | 18.0 | 18.0 | 24.0 | 24.0 | 30.0 | 30.0 | 36.0 | 36.0 | 36.0 | 36.0 | 36.0 | 36.0 |
| Efficiency | 70% | 70% | 70% | 70% | 60% | 60% | 60% | 60% | 50% | 50% | 50% | 50% | 50% | 50% |
| Length（L-mm） | 28.5 | 28.5 | 28.5 | 28.5 | 34.9 | 34.9 | 34.9 | 34.9 | 41.3 | 41.3 | 41.3 | 41.3 | 41.3 | 41.3 |
| Weight（g） | 143 | 143 | 143 | 143 | 177 | 177 | 177 | 177 | 211 | 211 | 211 | 211 | 211 | 211 |