D363P
Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
Powder Metal | Sleeve bearings | ≤5Kgf | ≤3Kgf | ≤15Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
Powder Metal | Ball bearings | ≤8Kgf | ≤3Kgf | ≤15Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Housing material | Bearing at output | Radial load (10mm from flange) | Shaft axial load | Shaft press fit force,max. | Radial play of shaft | Thrust play of shaft | Backlash at no-load |
Powder Metal | Sleeve bearings | ≤5Kgf | ≤3Kgf | ≤15Kgf | ≤0.08mm | ≤0.3mm | ≤3° |
Powder Metal | Ball bearings | ≤8Kgf | ≤3Kgf | ≤15Kgf | ≤0.05mm | ≤0.3mm | ≤3° |
Module | No. of teeth | Pressure angle | Helix angle | Hole diameter | Reduction ratio. |
0.5 | 11 | 20° | 18°(左,Left) | 3.16 | 1/18,1/25,1/94,1/132,1/250,1/349,1/683 |
0.5 | 17 | 20° | 18°(左,Left) | 3.16 | 1/13,1/48,1/68,1/180,1/491 |
0.5 | 8 | 20° | 18°(左,Left) | 2.28 | 1/33,1/887 |
Module | No. of teeth | Pressure angle | Helix angle | Hole diameter | Reduction ratio. |
0.5 | 11 | 20° | 18°(左,Left) | 3.16 | 1/18,1/25,1/94,1/132,1/250,1/349,1/683 |
0.5 | 17 | 20° | 18°(左,Left) | 3.16 | 1/13,1/48,1/68,1/180,1/491 |
0.5 | 8 | 20° | 18°(左,Left) | 2.28 | 1/33,1/887 |
Module | No. of teeth | Pressure angle | Hole diameter | Reduction ratio. |
0.6 | 11 | 20° | 3.16 | 1/5,1/19,1/27,1/71,1/100,1/139,1/264,1/516,1/721 |
0.6 | 17 | 20° | 3.16 | 1/4,1/14,1/51,1/189 |
Module | No. of teeth | Pressure angle | Hole diameter | Reduction ratio. |
0.6 | 11 | 20° | 3.16 | 1/5,1/19,1/27,1/71,1/100,1/139,1/264,1/516,1/721 |
0.6 | 17 | 20° | 3.16 | 1/4,1/14,1/51,1/189 |