Availability: | |
---|---|
Quantity: | |
H866(86mm)- 1.2° per step, 3Phase
I.CH
Nema 34 Stepping Motor
Electrical Specification | |||||||||
Series Model | Step Angle ( o ) | L (mm) | Rated Current (A) | Phase Resistance (Omh) | Phase Inductance (mH) | Holding Torque (N.cm) | Detent Torque (N.cm) | Lead Wire (NO.) | Motor Weight ( kg) |
H866-21035 | 1.2 | 66 | 3.5 | 1.2 | 2.5 | 210 | 3.5 | 3 | 2.0 |
H866-21045 | 1.2 | 66 | 4.5 | 0.7 | 1.5 | 210 | 3.5 | 3 | 2.0 |
H866-21068 | 1.2 | 66 | 6.8 | 0.3 | 0.65 | 210 | 3.5 | 3 | 2.0 |
H866-27035 | 1.2 | 78 | 3.5 | 1.6 | 5.0 | 270 | 5.8 | 3 | 2.5 |
H866-27045 | 1.2 | 78 | 4.5 | 1.0 | 3.0 | 270 | 5.8 | 3 | 2.5 |
H866-27068 | 1.2 | 78 | 6.8 | 0.42 | 1.3 | 270 | 5.8 | 3 | 2.5 |
H866-45035 | 1.2 | 98 | 3.5 | 2.5 | 6.5 | 450 | 8.5 | 3 | 3.0 |
H866-45045 | 1.2 | 98 | 4.5 | 1.4 | 3.9 | 450 | 8.5 | 3 | 3.0 |
H866-45068 | 1.2 | 98 | 6.8 | 0.6 | 1.7 | 450 | 8.5 | 3 | 3.0 |
H866-52035 | 1.2 | 114 | 3.5 | 3.1 | 8.2 | 520 | 11.0 | 3 | 3.5 |
H866-52045 | 1.2 | 114 | 4.5 | 1.8 | 4.8 | 520 | 11.0 | 3 | 3.5 |
H866-52068 | 1.2 | 114 | 6.8 | 0.75 | 2.1 | 520 | 11.0 | 3 | 3.5 |
H866-58035 | 1.2 | 126 | 3.5 | 3.5 | 9.8 | 580 | 16.5 | 3 | 3.8 |
H866-58045 | 1.2 | 126 | 4.5 | 2.1 | 6.2 | 580 | 16.5 | 3 | 3.8 |
H866-58068 | 1.2 | 126 | 6.8 | 0.9 | 2.6 | 580 | 16.5 | 3 | 3.8 |
H866-78035 | 1.2 | 150 | 3.5 | 4.5 | 13.2 | 780 | 20.5 | 3 | 4.2 |
H866-78045 | 1.2 | 150 | 4.5 | 2.6 | 8.2 | 780 | 20.5 | 3 | 4.2 |
H866-78068 | 1.2 | 150 | 6.8 | 1.1 | 3.5 | 780 | 20.5 | 3 | 4.2 |
* If need customize, contact our sales Dept.
Electrical Specification | |||||||||
Series Model | Step Angle ( o ) | L (mm) | Rated Current (A) | Phase Resistance (Omh) | Phase Inductance (mH) | Holding Torque (N.cm) | Detent Torque (N.cm) | Lead Wire (NO.) | Motor Weight ( kg) |
H866-21035 | 1.2 | 66 | 3.5 | 1.2 | 2.5 | 210 | 3.5 | 3 | 2.0 |
H866-21045 | 1.2 | 66 | 4.5 | 0.7 | 1.5 | 210 | 3.5 | 3 | 2.0 |
H866-21068 | 1.2 | 66 | 6.8 | 0.3 | 0.65 | 210 | 3.5 | 3 | 2.0 |
H866-27035 | 1.2 | 78 | 3.5 | 1.6 | 5.0 | 270 | 5.8 | 3 | 2.5 |
H866-27045 | 1.2 | 78 | 4.5 | 1.0 | 3.0 | 270 | 5.8 | 3 | 2.5 |
H866-27068 | 1.2 | 78 | 6.8 | 0.42 | 1.3 | 270 | 5.8 | 3 | 2.5 |
H866-45035 | 1.2 | 98 | 3.5 | 2.5 | 6.5 | 450 | 8.5 | 3 | 3.0 |
H866-45045 | 1.2 | 98 | 4.5 | 1.4 | 3.9 | 450 | 8.5 | 3 | 3.0 |
H866-45068 | 1.2 | 98 | 6.8 | 0.6 | 1.7 | 450 | 8.5 | 3 | 3.0 |
H866-52035 | 1.2 | 114 | 3.5 | 3.1 | 8.2 | 520 | 11.0 | 3 | 3.5 |
H866-52045 | 1.2 | 114 | 4.5 | 1.8 | 4.8 | 520 | 11.0 | 3 | 3.5 |
H866-52068 | 1.2 | 114 | 6.8 | 0.75 | 2.1 | 520 | 11.0 | 3 | 3.5 |
H866-58035 | 1.2 | 126 | 3.5 | 3.5 | 9.8 | 580 | 16.5 | 3 | 3.8 |
H866-58045 | 1.2 | 126 | 4.5 | 2.1 | 6.2 | 580 | 16.5 | 3 | 3.8 |
H866-58068 | 1.2 | 126 | 6.8 | 0.9 | 2.6 | 580 | 16.5 | 3 | 3.8 |
H866-78035 | 1.2 | 150 | 3.5 | 4.5 | 13.2 | 780 | 20.5 | 3 | 4.2 |
H866-78045 | 1.2 | 150 | 4.5 | 2.6 | 8.2 | 780 | 20.5 | 3 | 4.2 |
H866-78068 | 1.2 | 150 | 6.8 | 1.1 | 3.5 | 780 | 20.5 | 3 | 4.2 |
* If need customize, contact our sales Dept.
Mechanical Dimensions |
|
Standard Leadwire Configuration |
|
Mechanical Dimensions |
|
Standard Leadwire Configuration |
|
Custom Shaft
Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor
Planetary Gearbox Stepper Motor
Spur Gearbox Stepper Motor
Connector
Molex, Harwin, Tyco/AMP, JST etc.
Special length, Protective hose
Custom Shaft
Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor
Planetary Gearbox Stepper Motor
Spur Gearbox Stepper Motor
Connector
Molex, Harwin, Tyco/AMP, JST etc.
Special length, Protective hose
FAQ
Q1. What is frame size for NEMA 34 Step Motor?
A: It is 86mm*86mm size.
Q2. What is step angle of this stepper motor?
A: It is 1.2deg.
Q3: Can you add a brake and encoder on the NEMA 34 stepper?
A: Yes, we can add these parts according to customers’ needs.
FAQ
Q1. What is frame size for NEMA 34 Step Motor?
A: It is 86mm*86mm size.
Q2. What is step angle of this stepper motor?
A: It is 1.2deg.
Q3: Can you add a brake and encoder on the NEMA 34 stepper?
A: Yes, we can add these parts according to customers’ needs.