• Manufacturer Part Number: H863
• Motor Type: 8 Wires 2/4 Phase Stepping Motor
• Frame Size: 86mm Stepper Motor Nema 34 Mounting
• Stepper Angle:1.8deg
• Holding Torque: 0.45N.m
• Output Shaft Type: Single Shaft or Double Shaft
• Application: Scanner, CNC Machine, Laser cutters
• Option: Encoder, Stepper Driver
• Ambient Temperature: -20 ºC ~ +50 ºC
The size of the hybrid open-loop stepping motor whose goal is to control motion that I.CH manufactures and supplies is NEMA 34. it has the characteristic of high performance, high torque, compact size.
|Series Model||Step Angle ( o )||L |
|Rated Current (A)||Phase |
|Holding Torque |
|Detent Torque (N.cm)||Lead |
Pull Out Torque Curve
MODEL: H863-18040 CURRENT: 5.6A VOLTAGE: 48V/60VDC FULL STEP
The diagram shows the method of wire connections. There are two methods. One (Bipolar, four wires) is that the red and green connects to one coil, the yellow and blue connect to another coil. The other(Uni-polar, eight wires) is that the yellow, the red, the blue and the black connects to one coil. The white, the orange, the brown, the green connects to the other coils.
|Standard Leadwire Configuration|
Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor
Planetary Gearbox Stepper Motor
Spur Gearbox Stepper Motor
Molex, Harwin, Tyco/AMP, JST etc.
Special length, Protective hose
For special requests such as material (single or dual shaft, planetary gearbox), we can custom. If you have a request, please contact us.
Q1. What is frame size for NEMA 34 Step Motor?
A: It is 86mm*86mm size.
Q2. What is step angle of this stepper motor?
A: It is 1.2deg.
Q3: Can you add a brake and encoder on the NEMA 34 stepper?
A: Yes, we can add these parts according to customers’ needs.