NEMA 23 Linear Stepper Motor
Electrical Specification
The NEMA 23 linear actuator that I.CH designs and manufactures are external linear stepper motor, which consists of lead screw and nut.Relative to the screw, the nut moves in a straight line. The anti-rotation device needs to be designed by the customer.
For NEMA 23 stepper motor, we can also provide a non-captive, captive type.
| Motor Electrical Specification | |||||||||
| Series Model | Step Angle ( o ) | L (mm) | Rated Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Holding Torque (N.cm) | Detent Torque (N.cm) | Lead Wire (NO.) | Motor Weight ( g) |
| HL573-05520 | 1.8 | 41 | 2.0 | 1.2 | 2.5 | 55 | 2.5 | 4 | 470 |
| HL573-08025 | 1.8 | 45 | 2.5 | 1.0 | 2.2 | 80 | 2.8 | 4 | 520 |
| HL573-11025A | 1.8 | 51 | 2.5 | 1.2 | 3.2 | 110 | 2.8 | 4 | 520 |
| HL573-11025B | 1.8 | 56 | 2.5 | 1.3 | 4.2 | 110 | 3.5 | 4 | 680 |
| HL573-11042 | 1.8 | 56 | 4.2 | 0.4 | 1.2 | 110 | 3.5 | 4 | 680 |
| HL573-15025 | 1.8 | 64 | 2.5 | 1.5 | 4.5 | 150 | 5.0 | 4 | 850 |
| HL573-15042 | 1.8 | 64 | 4.2 | 0.55 | 1.2 | 150 | 5.0 | 4 | 850 |
| HL573-18025 | 1.8 | 76 | 2.5 | 1.8 | 6.5 | 180 | 6.0 | 4 | 1050 |
| HL573-18042 | 1.8 | 76 | 4.2 | 0.6 | 1.8 | 180 | 6.0 | 4 | 1050 |
| HL573-25030 | 1.8 | 100 | 3.0 | 1.4 | 5.5 | 250 | 10 | 4 | 1250 |
| HL573-25042 | 1.8 | 100 | 4.2 | 0.8 | 3.0 | 250 | 10 | 4 | 1250 |
| HL573-28030 | 1.8 | 112 | 3.0 | 1.6 | 6.8 | 280 | 12 | 4 | 1400 |
| HL573-28042 | 1.8 | 112 | 4.2 | 0.9 | 3.8 | 280 | 12 | 4 | 1400 |
| Screw Specification | ||
| Screw Dia.(mm) | Travel Per Step(mm) | Lead(mm) |
| Tr9.53 | 0.0127 | 2.54 |
| 0.0254 | 5.08 | |
| 0.0508 | 10.16 | |
| Tr8.00 | 0.0400 | 8 |
Mechanical Dimensions
| Mechanical Dimensions |
| Standard Leadwire Configuration |
Custom Option
Custom Shaft
Screw Shaft length
External Nut
Nut Material：Plastic, Copper, Steel, POM
Connector
Molex, Harwin, Tyco/AMP, JST etc.
Special length, Protective hose
Download
Full Datasheet
HL573.pdf
Ability
Ability:
This NEMA 23 linear stepper actuator is the largest that I.CH supplies. In terms of type, it is captive. If you have needs, we also can provide non-captive motors for you as long as you provide the corresponding parameter. For this motor, for having lower noise, higher efficiency, we add thermoplastic in the rotor drive nut and a stainless steel lead screw.
Advantage:
1, A high cost-effective and reliable motion solution.
2, Overall high efficiency.
3, Long life
Service:
1, Custom service
2, The repair service
FAQ:
1, Can you provide the ball screw for this hybrid linear stepper actuator?
Yes.
2, What is the product delivery time?
About 30-45days.
3, what is the resistance of linear stepper motor?
The specific parameter that you can see in the PDF.