32mm DC Planetary Gear Motor
Gearbox Motor Specification
27mm Planetary Gear Reduction integrated a 32mm planetary gearbox of 1:3.7 to 1:1012 gear ratio. It is a good solution to application that with limited space but low speed and high torque.
| GEARBOX MOTOR SPECIFICATION | ||||||||||||||||||||
| Type | Ratio | 1:3.7 | 1:5 | 1:16 | 1:19 | 1:27 | 1:51 | 1:79 | 1:100 | 1:139 | 1:190 | 1:253 | 1:305 | 1:352 | 1:408 | 1:516 | 1:596 | 1:721 | 1:1012 | |
| D323 | Rated torque | kg.cm | 0.4 | 0.5 | 1.5 | 1.8 | 2.5 | 3.5 | 6 | 8 | 12 | 14 | 18 | 24 | 28 | 34 | 38 | 45 | 45 | 45 |
| Rated speed | rpm | 1600 | 1300 | 380 | 320 | 220 | 120 | 76 | 59 | 51 | 32 | 24 | 20 | 17 | 15 | 12 | 10 | 8 | 6 | |
| Gearbox | Instantaneous torque | Kg.cm | 15 | 30 | 45 | 60 | ||||||||||||||
| Allowable torque | Kg.cm | 10 | 20 | 30 | 40 | |||||||||||||||
| Length | mm | 28 | 37.5 | 47 | 56.5 | |||||||||||||||
| Backlash | O | 0.7 | 0.8 | 1 | 1 | |||||||||||||||
| Weight | g | 133 | 162 | 190 | 218 | |||||||||||||||
Motor Data
| MOTOR DATA | |||||||
| Frames volt (V) | No road speed (rpm) | Noroad current (mA) | Rated torsion (g.cm) | Raterd speed (rpm) | Raterd current (mA) | Output power (w) | Weight (g) |
| 3A7K8-24V | 7800 | 100 | 120 | 6800 | 495 | 8.25 | 102 |
| Note: Product voltage, output shaft size, electrical performance, you can request custom-made! | |||||||
| MOTOR CHARACTERISTICS |
Mechanical Dimensions
| Mechanical Dimensions |
Custom Option
Encoder
Clutch
Connector
Molex,Harwin,Tyco/AMP,JST etc.
Motor
Brush Motor,Brushless Motor,Stepper Motor
Shaft
D-cut Shaft,H-cut Sahft,Rround Sahft
Download
Full Datasheet
D323-3A.pdf
Ability:
This series 32mm motor that I.CH manufactures is the 24V planetary gear motor. Due to good structure, not only it can withstand higher loads, but it also has a longer life. Including but not limited to the above advantage, it is also very easy to maintain and install.
Advantage:
1, All-cut gear.
2, A good solution to the application that requires low rpm and high torque.
3, Planetary gearbox design.
4, Encoder or brake can provide.
Service:
1, One-year guarantee.
2, Excellent after-sale service.
Package:
1, Carton or pallet.
2, Depending on the volume, the delivery time is 20-45 days.
1, Where can I find the performance of torque, current?
This diagram can be found in PDF.
2, What is the type of shaft you provide?
D-cut Shaft, H-cut Shaft, Round Shaft.