You are here: Home / News and events / Why are we using gearmotors for vending machine

Why are we using gearmotors for vending machine

Views: 7     Author: Site Editor     Publish Time: 2019-04-29      Origin: Site

Some customer was confused when searching a right solution for their vending machine, today let’s talk about differences between stepper and geared motor.

Some might say they want to select stepper for vending machine because stepper has distinct advantages over gearmotor. 1.8 degrees accurate positioning will control machine better.

But in vending machine, you barely need to control things there, gear motors with low cost, easy control and no drive, although might introduce some braking effect, but the gear motor is still a best choice for coffee vending machine.

Another pointed a stepper motor can survive being stalled continuously with full drive electric power applied. A geared motor will burn out under similar conditions. In this case, you just choose a correct clutch for gear motor to prevent outside pressure from machine malfunction. Still, the stepper is unnecessary here.





Add:Room 1704, Building D2, Vanke Duhui Tiandi, 28 Jiangnan Road,Dongshan Street, Jiangning District, Nanjing City, Jiangsu Province,China

Tel:+86 25 5118 0871
Fax:+86 25 5118 0872


Copyright  2016 I.CH All rights reserved. Supproted by Leadong   Sitemap