Article List

• 24V-220V Servo Motor for 3D Printer Motor, Machine Tools and Household Appliances

  • For this catalog, we have square and cylindrical shapes. The frame size is from 22mm to 130mm for you to choose.• Designed for operation at voltages ranged from 24V-220V.• Shaft Type: Single Shaft with keyway or Customize Motor for Brake• Low vibration and noise, High precision• Applications: CNC

  October 08, 2022
• 48V Frameless Brushless Torque Servo Motor for Robot Arm and Medical Machine Description

  48V Frameless Brushless Torque Servo Motor for Robot Arm and Medical MachineDescription• Seven frame sizes, which can adapt to the most popular embedded devices and collaborative robot (Cobot) design• Designed for operation at DC voltages up to 48 volts• Optional integrated Hall sensor without incre

  September 21, 2022
• How To Select Stepper Motor

  First: The holding torque of the stepper motor, which is similar to the “power” of the stepper motor. The physical structure of the stepper motor is not similar to AC, DC motor, the output power of the motor is changeable. Commonly, the selection of the stepper motor should be based on the amount of

  December 07, 2020
• The Three Control Mode of Servo Motor

  　　1. Pulse control mode　　For small machines, it is common to use a pulse to control the position of the motor. This control method is very simple and easy to understand. The basic control method: the number of the pulse determines the motor pulse, the frequency of pulse determines the motor speed.　　

  December 02, 2020
• The difference between bus line control and pulse control

  By receiving pulse current, the control of speed, position, the direction in the stepper motor can achieve. The number of the pulse determines the position of the stepper motor. The rate of the pulse determines the speed of the motor. The direction of the pulse determines the rotation speed of the m

  November 24, 2020
• The Reason Why The Stepper Motor loses step and Vibrates?

  　　The Stepper Motor is an open-loop motor that converts angular displacement into angular displacement. When the stepper motor does not lose a step, the speed, the position of the stop is determined by the frequency of the pulse signal and the number of pulses. When the stepper motor receives a puls

  November 18, 2020
• How the two phase stepper motor connects wire?

  　　The two-phase stepper motor usually has three types: four, six, and eight wire. The schematic diagram is as follows:　　In reality, the two-phase stepper motor comes from four phases. The four-wire type is drawn in series or parallel and then draws four wires. In terms of six wire types, one is draw

  November 11, 2020
• The Heating Problem of the Stepper Motor and It's Solution

  1. The Heating Reason for The Stepper Motor As for various stepper motors, it’s internal structure consists of an iron core and winding coils. There is resistance in the windings, the current will cause a loss, which is proportional to the resistance the square of the current. If the current is not

  October 14, 2020
• The Subdivision Control of The Stepper Motor

  　　The stepper motor is a widely used actuator, which is used in the various automatic control system. Recently, I participate in the project of grating splicing device for laser compression, whose accuracy requirements reaches up to nanoscale, which has a high requirement for the stability of the sy

  October 09, 2020
• Gear Motor for Smart Lock

  　　At Present, the driving motor of the smart lock has a large size and low torque. Besides, the steering is single, the control is unstable, which is easy to fail and low life.　　To solve the above-mentioned deficiency, I.CH design a new smart lock gear motor, which is a simple structure, stable cont

  September 29, 2020