Article List

• What did I.CH do for lock suppliers?

  I.CH keep suppling lock cylinder gear to “Mul-T-Lock” for many years, we co-designed gearbox with “Mul-T-Lock”, the gear has been used in “Mul-t-lock” ENTR series smart door lock cylinder and this product is extremely popular. It not only makes unlock easier, but also makes the house a safer place.

  August 08, 2018
• Advantages and drawbacks of DC Geared Motors

  The world technology has a great development because of emergence of Reduced Motor, the general development tendency of geared motor is as follows: 1. High water quality, high-performance. Cylindrical gears with the latest production and processing technology, achieved characteristics of small size,

  technical support July 20, 2018
• I.CH Planetary Gearbox Parts in Sailplane Field

  The USA customer purchased planetary gearbox prototypes from us last year, which is a motor supplier located in USA and specializes in sailplane career, they attachted our gearbox with their own motor devices, and found complete product did a great job on power a sailplane, so this time they ordered

  July 10, 2018
• Brief description of Stepper Motor and Servo Motor

  Stepper motor is to convert electrical pulse signal to angular displacement or line displacement of the Open-loop control element parts, in the case of not overloading, the motor speed and stop position only depends on the frequency of the pulse signal and the number of pulses, and not affected by t

  technical support July 05, 2018
• Product Number Code For DC Gear Motor

  D 36 2 xxx - xxx 010= 1:10 , 300= 1:300 180 = 18kg.cm , 012=1.2kg.cm 2= DC Spur Gear Motor , 3= DC Planetary Motor Dimension of gearbox : 12,16,

  technical support February 10, 2018
• Hybrid Stepper Motor Code

  H 20 1 - 303 06 D Shaft type : S=single, D=double, Blank=both Phase current (A) :0.6Torque (N.cm) : 303 Motor Type: 1=Square 1.8°, 2=Square 0.9°,

  technical support January 15, 2018
• Stepper Motor Wiring Options

  The basic operation of any stepper motor relies on the use of inductive coils which push or pulls the rotor through its rotation when they are energized. A pair of wire leads coming from a stepper motor will correspond to at least one of these windings and possibly more depending on the motor type.

  technical support March 05, 2018
• DC Brush Motor

  DC Brush MotorPrinciples of operation Reference to the chart reveals useful performance information valid for all fulling servomotors.It shows speed n, current I, output power P and efficiency ¦Ç plotted against torque M for a given supply voltage U. Torque M is a function of the current I and th

  technical support January 10, 2018
• Brushless DC Motor

  Brushless DC MotorPrinciples of operation The differences between a DC motor having a mechanical commutation system and a BLDC motor are mainly found in :- the product concept- the commutation of phase currents.From the user's point of view, brushless DC motors follow the same equations as those

  technical support January 09, 2018
• Unipolar/Bipolar Connections (2-Phase Motors)

  ConnectionsResistance(Ohms)Inductance(mH)Current (A)Voltage(V)Holding Torque(oz-in)UnipolarSame as CatalogSame as CatalogSame as CatalogSame as CatalogSame as CatalogBipolar SeriesCatalog X 2Catalog X 4Catalog X 0.707Catalog X 1.414Catalog X 1.414Bipolar Half CoilSame as CatalogSame as CatalogSame a

  technical support January 11, 2018