NEMA 17 Stepper Motor 0.9 degree
Electrical Specification
Character
The open-loop NEMA 17 hybrid stepping motor that I.CH supplies is compact size. And it can be used in many mechanical equipment. The kits (wire, connector) is high quality, so the stepper motors can be used many years. If you have any special requirements or specifications(rpm, voltage, dual shaft), please contact us.
The NEMA Stepper motor that I.CH supplies has many size, if you want to larger size, you can see NEMA 23(57mmx57mm), NEMA 24(60mm).
Electrical Specification | |||||||||
Series Model | Step Angle ( o ) | L | Rated Current (A) | Phase | Phase | Holding Torque | Detent Torque (N.cm) | Lead | Motor |
H422-01006 | 0.9 | 28 | 0.6 | 9 | 9 | 10 | 0.9 | 4 | 130 |
H422-02413 | 0.9 | 34 | 1.3 | 2.4 | 3.6 | 24 | 1.2 | 4 | 220 |
H422-02417 | 0.9 | 34 | 1.7 | 1.2 | 2.2 | 24 | 1.2 | 4 | 220 |
H422-02404 | 0.9 | 34 | 0.4 | 30 | 45 | 24 | 1.2 | 4 | 220 |
H422-02004 | 0.9 | 34 | 0.4 | 30 | 22 | 20 | 1.2 | 6 | 220 |
H422-01202 | 0.9 | 34 | 0.16 | 75 | 54 | 12 | 1.2 | 6 | 220 |
H422-03617 | 0.9 | 40 | 1.7 | 1.5 | 3.8 | 36 | 1.8 | 4 | 280 |
H422-03613 | 0.9 | 40 | 1.3 | 2.5 | 6.2 | 36 | 1.8 | 4 | 280 |
H422-02612 | 0.9 | 40 | 1.2 | 3.2 | 3.8 | 26 | 1.8 | 6 | 280 |
H422-02604 | 0.9 | 40 | 0.4 | 30 | 34 | 26 | 1.8 | 6 | 280 |
H422-04217 | 0.9 | 48 | 1.7 | 1.8 | 4.0 | 42 | 2.2 | 4 | 350 |
H422-03613 | 0.9 | 48 | 1.3 | 3.0 | 7.0 | 36 | 2.2 | 4 | 350 |
H422-04223 | 0.9 | 48 | 2.3 | 1.2 | 2.0 | 42 | 2.2 | 4 | 350 |
H422-02704 | 0.9 | 48 | 0.4 | 30 | 28 | 27 | 2.2 | 6 | 350 |
* We can make special current/phase, lead wires, shaft for you.
* If need customize, contact our sales Dept.
Matched Driver
Mechanical Dimensions
| Mechanical Dimensions |
| Standard Leadwire Configuration |
Custom Option
Custom Shaft
Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
Stepper Motor with Encoder
Encoder is customized for customer
Stepper Geared Motor
Planetary Gearbox Stepper Motor
Spur Gearbox Stepper Motor
Connector
Molex, Harwin, Tyco/AMP, JST etc.
Special length, Protective hose
Download
Full Datasheet
H422.pdf
Ability
Factory Ability
I.CH Motion Co., Ltd., established in 2006, and we specialize in different kinds of micro motor, like hybrid stepper motor, stepping motor driver, step engine, stepping engine, integrated step servo motors, integrated step AC servo motors, Brushless DC Motors, Brushless Servo Motors, Step Reduced Motor and and so on. Our R&D team and sales team will try best to reach all customers’ requests and needs, for providing OEM, ODM service, factory-visiting, VISA support, etc.
Round Stepper Motor Stepper Motor with Encoder Stepper Motor with Thread Shaft
Advantages
1. OEM&OED Service, after-sales service 24*7, technical support;
2. 0.1% defect rate and;
3. Low Prices Direct From Factory Suppliers;
Cleaner Grinder for Rotor Machine Center
Dryer Testing Area Soundproof Room
Package
-Pack by protection foam, like below images;
-Shipping via sea, air, courier, ups to weight of total products, recommend you suitable shipping way;
-Estimated delivery: 2 to 8 weeks.
FAQ
Q1. I want to add an encoder on NEMA 17 Step, it is possible?
A: Yes, we can add encoder, reducer and plug as per your needs.
Q2. I would like to extend shaft length, does it affect delivery?
A: Yes you can extend shaft length, it will make delivery a little longer because the shaft is non-standard.
Q3. What the step angle of NEMA 17 Stepper Motor?
A: Our NEMA 17 has 0.9deg and 1.8deg two kinds of step angle.