2 Phase Stepper Motor Driver
Product Description
Description
Based on the advanced technology, I.CH manufactures the 2 Phase series stepper motor driver that has a high-performance subdivision and is suitable for the two-phase and four-phase stepper motor. Compared with other drivers, under the same condition such as current and voltage, P series stepper motor that I.CH makes has a higher speed and better accelerating ability. For subdivision control, the two-phase series driver uses a full-digital current loop, which makes the motor has a low torque fluctuation, stable operation at low speed, low vibration, and low noise, and relatively high torque at high speed, high position accuracy.
The combination of stepper motor and driver makes the operation effect close to the servo motor. For the application, the stepper motor with a driver can decrease expenditure than a servo motor.
To protect the motor from damage, the stepper motor driver has current, short circuit solutions.
If you want to know more specifications, you can download our PDF.
| Model | Picture | Microstep Per Step | Output Current (A) | Input Voltage (V) | Matched Stepper Motor | Package | Manuall (Datasheet) |
| 2P202 | 2,4,8,16,32,64,128 5,10,20,25,50,100,125 | 0.54-4.2 | DC 20-50V | NEMA17, 23, 34 (42mm,57mm,86mm) | 118*75.5*34mm 0.3kg | 2P202 Stepper Motor Driver.pdf | |
| 2P180 | 2,4,8,16,32,64,128 5,10,20,25,50,100,125 | 1.8-7.2 | DC 24-80V AC 18-60V | NEMA 17-43 (42-110mm) | 151*97*48mm 0.6kg | 2P180 Stepper Motor Driver.pdf | |
| 2P240 | 2,4,8,16,32,64128,256 5,10,20,25,40,50,100,200 | 2.5-7.8 | AC 24-80V DC 24-80V | NEMA 17-43 (42-110mm) | 151*97*48mm 0.8kg | 2P240 Stepper Motor Driver.pdf | |
| 2P800 | 2,2.5,3,4,5,6,8 10,12,16,20,25,30,32,40,50 | 0.45-7.8 | AC 80-220V | NEMA 34-43 (86-110mm) | 176*61*145mm 1.2kg | 2P800 Stepper Motor Driver.pdf |